Shw | Snapper | Sparex (Agriwipes) | Loctite | Demco | Hylomar | Edge Products

2023 DEMCO 1300 GRAIN CART CA5741

CA5741

1300 bu grain cart, single auger, 20" auger, 1250/50R32 tires, grain viewing doors, roll tarp, scale kit, bluetooth monitor kit, pto, grey

$0.00

View Details

NEW 2023 DEMCO 650 GRAIN CART CA5748

CA5748

650 bu, grey, 1000pto, 30.5x32-12 ply tires, roll tarp, 14" adjustable auger, 150hp+, 250 bu/min unload

$0.00

View Details

NEW 2023 DEMCO 750 GRAIN CART CA5950

CA5950

750bu grain cart, grey, 1000pto, roll tarp, heavy duty jack, 14" auger, 150hp+, adjustable auger, 250bu/min unload, 30.5x32-12ply tires

$0.00

View Details

USED 2021 EDGE HDB72 HIGH DUMP BUCKET BC5601

BC5601

Like new, 72" high dump, bolt on cutting edge EDGE High Dump Bucket is ideal for loading feed mixers and trucks. This bucket features two heavy-duty hydraulic cylinders that pivot the bucket for dumping, increasing your vertical lift by approximately 44" and horizontal reach by approximately 13". A see-through spill guard allows greater visibility

$3,950.00

View Details

NEW 2021 DEMCO 40G SPRAYER

Demco 40G

40 gallon tank with a sloped bottom sump for total drainage, 5" fill well, and 1 1/4" outlet Gallon and liter markings on the tank Agitation is standard on all tanks Special molded-in baffling in bottom of tank for enhanced agitation Rugged 12 gauge formed steel skid frame Pressure regulator Electric motor, diaphragm pump with Viton® valves - draws 9 amps @ 20 PSI (delivers 5 GPM) Handgun with 15’ spray hose (380RB) 80” spray boom with 2 nozzles (AN1.5). 12' boom with 4 nozzles and spring loaded boom breakaway or 18' boom with 6 nozzles Skid dimensions 26.5" wide x 34" long x 21" high Rear mount fits category “1” three-point

$1,100.00

View Details

NEW 2020 EDGE 8' SNOW PLOW BL5072

BL5072

NEW EDGE 8' SNOW PLOW w/ trip edge and oscillation, skid steer attachment plate,

$0.00

View Details

NEW 2021 EDGE RM72 ROTARY MOWER MO4403

MO4403

NEW EDGE ROTARY MOWER 72", closed front, skid steer mount, built for performance to handle heavy weeds, undergrowth, brush and small saplings up to 4" in diameter. Direct drive hydraulic motor requiring 8-40 gpm and a heavy duty stump jumper. Comes complete with hoses and flat face couplers.

$6,326.00

View Details

Gasket Eliminator 515 - 50ml

S.14963

LOCTITEÃ‚Â® 515 Gasket Eliminator (50ml). Replacement for pre-cut gaskets. Fills gaps to .010 (0.25mm) and does not shrink. Continuous operating temperature range of -60Ã‚Â°F to 300Ã‚Â°F. Cures to a flexible seal 1-8 hours.

$30.04

View Details

Bale Spear - Straight 1,200mm, (H - fluted)

S.130041

Fitting: Cross Drilled Tine Ø42mm

$121.97

View Details

Hot Sellers

New Products