Kasco Manufacturing | Sparex | Pressol | Kats | Other | Demco | Edge Products

Tractor Separator - 5T

S.119888

Supports weight of 10,000 lbs. per jack stand Min Height 14.5″ (without extension) / 18.5″ (with extension) Max Height 23.7″ (without extension) / 27.7″ ( with extension) Rail Length 118″ Net Weight 150 Lbs. Safety locking bolts on each jack.

$1,084.93

View Details

Tractor Separator - 10T

S.150442

HEAVY DUTY - Tractor Splitter for servicing higher horse power tractors safely. Max supported weight 20,000 per jack stand Min. Height: 19.6″ / 23.6″ (with extension) Max Height: 29.1″ / 33″ (with extension) Rail Length 156″, Width 23.6″ Safety locking bolts on each jack stand CE Certified tractor splitting trolley

$1,904.17

View Details

USED 2015 VERMEER 504PR ROUND BALER RB4825

RB4825

CALL CODY AT 507-450-5104 4,000 bales, net wrap, 540 pto, 4x5, less applicator, monitor, auto wrap, bale ramp, cutter, variable chamber, endless belts, single axle

$36,900.00

View Details

NEW 2022 PETERSON 30FT TMR FEEDER

FE4465

30' TMR, single axle, 16" tires,

$6,900.00

View Details

Radiator

S.127961

Overall height: 745mm, \rOverall width: 574mm, \rThickness: 132mm, \rInlet: Ã˜54.2mm, \rOutlet: Ã˜54.7mm\r

$1,557.49

View Details

Crankshaft

S.144109

$2,444.53

View Details

Radiator

S.127959

Overall height: 685mm, Overall width: 576mm, Thickness: 132mm, Inlet: Ã˜54mm, Outlet: Ã˜54.5mm

$1,628.46

View Details

USED 2021 EDGE HDB72 HIGH DUMP BUCKET BC5601

BC5601

Like new, 72" high dump, bolt on cutting edge EDGE High Dump Bucket is ideal for loading feed mixers and trucks. This bucket features two heavy-duty hydraulic cylinders that pivot the bucket for dumping, increasing your vertical lift by approximately 44" and horizontal reach by approximately 13". A see-through spill guard allows greater visibility

$3,950.00

View Details

NEW 2021 DEMCO 40G SPRAYER

Demco 40G

40 gallon tank with a sloped bottom sump for total drainage, 5" fill well, and 1 1/4" outlet Gallon and liter markings on the tank Agitation is standard on all tanks Special molded-in baffling in bottom of tank for enhanced agitation Rugged 12 gauge formed steel skid frame Pressure regulator Electric motor, diaphragm pump with Viton® valves - draws 9 amps @ 20 PSI (delivers 5 GPM) Handgun with 15’ spray hose (380RB) 80” spray boom with 2 nozzles (AN1.5). 12' boom with 4 nozzles and spring loaded boom breakaway or 18' boom with 6 nozzles Skid dimensions 26.5" wide x 34" long x 21" high Rear mount fits category “1” three-point

$1,100.00

View Details

Hot Sellers

New Products