close
Categories
Hot Sellers Manitou - SMA
52 items
GRAIN DRILL TUBE-17" TAPERED RUBBER
199-TA17
Flexible rubber tapered seed tube for Van-Bront Drills. Has 1.5" ID top opening and 1" ID bottom opening. Measures 17" Long.
- $8.91 8.91 USD
RIPPLE COULTER 16" 4MM-YETTER
845-R16402
16" x 4mm Ripple Coulter. Has 4" center hole and 4 holes for 1/2" bolts on 5-1/4" circle. Will replace Yetter 2571-161
- $39.61 39.61 USD
2X13 Tire for 21340 Grain Drill Wheel
013-5410321
Has Clincher Base. Replaces Great Plains 814-069C.
- $39.16 39.16 USD
1/2-20 THREAD WHEEL STUD
982-913574
- $1.92 1.92 USD
PICKER SPINDLE LUBE & DETERGENT-1 GAL
225-128
4 GAL = 1 CASE. PICKSMART Spindle Lubricant and Detergent - Gives maximum efficiency and insures good results with all brands of cotton picking machines. Mix 32-64 ounces per 100 gal water. Order Multiples of 4. NOTE : Shipping cost on this item doesnt follow our standard flat rates due to the weight and the challanges associated with shipping a liquid product
- $8.33 8.33 USD
1/4" X 7" FIELD CULTIVATOR SWEEP
686-7FCH447
The FCH series is designed to fit JD 726,940-960-980, 985,1600; IHC Vibrashank; D.M.I. Tigermate; Kent; Hiniker; Ingham; JD; Wil-Rich; Crust-Buster; Hesston; Landoll; Rhino; Athens; Flexi-Coil; Sunflower. Use 2 7/16" #3 Head Bolts 1-5/8' to 1-3/4" Spacing
- $9.96 9.96 USD
FIMCO 2.4 GPM 12 VOLT PUMP
346-5151087
12 VOLT DIAPHRAM DEMAND PUMP, 2.4 GPM 60 PSI, 8 AMPS, ROUND-UP READY, BOXED WITH 2 - 3/8" BARB FITTINGS
- $112.64 112.64 USD
DUMP RAKE TOOTH
804-RC2164
- $15.75 15.75 USD
KMC/UNVERFERTH RIPPER POINT
972-69547KU
Has oblong mounting hole for dual applications, KMC and Unverferth. 1-3/8" square base and narrow boot for 3/4" shank, wear cap and fin. Will replace KMC 16-080-282.
- $45.60 45.60 USD
