close
SMA, CLAAS - Tillage
224 items
![GUIDE](/userdocs/products/claas.jpg?width=300&format=webp)
GUIDE
0771391
- $195.30 195.30 USD
![FOOTPIECE FOR 1"X3" SHANK](/userdocs/products/509-fp1.jpg?width=300&format=webp)
FOOTPIECE FOR 1"X3" SHANK
509-FP1
4" C-C hole spacing, 3/8" steel all welded footpiece. Adjustment slot is open to allow footpiece to trip. Fits Hamby, Roll-A-Cone, CandJ.
- $90.13 90.13 USD
![FOOTPIECE W/PLATE FRONT&REAR](/userdocs/products/509-fp1f.jpg?width=300&format=webp)
FOOTPIECE W/PLATE FRONT&REAR
509-FP1F
Plates have multiple holes Fits 1"x3" shank. 4" C-C hole spacing,
- $124.63 124.63 USD
![1X3 SHANK 4X4 TOOL BAR CLAMP](/userdocs/products/509-l44.jpg?width=300&format=webp)
1X3 SHANK 4X4 TOOL BAR CLAMP
509-L44
Toolbar Clamp, Fits 1" x 3" shank and a 4" x 4" toolbar, 3/8" x 6" body with 1" bolts and plated nuts, 16mm set screws.
- $83.93 83.93 USD
![1X3X30" SHANK W/FP1 FOOT PIECE](/userdocs/products/509-sf130.jpg?width=300&format=webp)
1X3X30" SHANK W/FP1 FOOT PIECE
509-SF130
All of our Toolbar Shanks are manufactured from C1080-high carbon steel. Our shanks are drilled, not heated and punched, to assure that the temper of the steel is not lost in the heating process and even very long sweeps run level.
- $115.34 115.34 USD
![1 X 3 X 34" SHANK W/FT PC](/userdocs/products/509-sf134.jpg?width=300&format=webp)
1 X 3 X 34" SHANK W/FT PC
509-SF134
All of our Toolbar Shanks are manufactured from C1080-high carbon steel. Our shanks are drilled, not heated and punched, to assure that the temper of the steel is not lost in the heating process and even very long sweeps run level.
- $190.83 190.83 USD
![4X12 NYLON ASBY SM CROWN TIRE](/userdocs/products/013-412401.jpg?width=300&format=webp)
4X12 NYLON ASBY SM CROWN TIRE
013-412401
4 x 12 Nylon Wheel Assembly with 5203KYY2 double row bearing. Fits John Deere Model 856 and Krause 4600 Row Crop Cultivators.
- $113.05 113.05 USD
![14" DISC HILLER WITH 22" STANDARD](/userdocs/products/023-30525.jpg?width=300&format=webp)
14" DISC HILLER WITH 22" STANDARD
023-30525
Has 6 bolt hub - 1 1/4" shank
- $116.29 116.29 USD
![20"X6.5MM SMOOTH SHALLOW 1-3/4" RD](/userdocs/products/114-206518sp.jpg?width=300&format=webp)
20"X6.5MM SMOOTH SHALLOW 1-3/4" RD
114-206518SP
20" X 6.5mm smooth disc blade, shallow concavity, 1-3/4" round. For Sunflower Land Finishers 6211, 6212, 6220, 6221, 6332, 6233, 6333, 6432, 6433; optional on 6331, 6430. Replaces SN4662N.
- $60.04 60.04 USD