close
Filter By
Price
Product Type
SMA - Tillage
925 items
![GLENCOE HARROW TINE-P1546](/userdocs/products/936-gl2.jpg?width=300&format=webp)
GLENCOE HARROW TINE-P1546
936-GL2
Black Spring/Harrow Tine - Coil I.D. 2.15"-.375 Wire - Order multiples of 50 - Fits Glencoe Harrow and Row Crop Cultivators.
- $5.25 5.25 USD
![KRAUSE DISC BEARING 1927-11-0](/userdocs/products/851-sma1927.jpg?width=300&format=webp)
KRAUSE DISC BEARING 1927-11-0
851-SMA1927
Has Rubber Ring. For 1-1/2" round axle. Fits 1590, 1900, 2100, 2200, 3900, 4900 Series, Dominator Front Gang. Replaces 1927-11-0.
- $72.64 72.64 USD
![IH DISC HUB BEARING KIT FOR HD 496](/userdocs/products/864-sma123096p.jpg?width=300&format=webp)
IH DISC HUB BEARING KIT FOR HD 496
864-SMA123096P
Wheel Bearing Kit for I.H. 5500, 5600, 5700, Chisel Plows; 4500, 4600 Cultivators; 4700 Tiller; 7500 MB Plow; 3900, 770, 596, and late model 496 machines with 6 bolt heavy duty hubs - Replaces OEM 123096A2 - Uses Import Bearings.
- $58.73 58.73 USD
![RETAINING RING AMCO HIPPER](/userdocs/products/747-11005.jpg?width=300&format=webp)
RETAINING RING AMCO HIPPER
747-11005
Retaining ring for 3416 bearing housing.OD 3.75 ID 3.375 THICKNESS .056 WIDTH 1.87 GAP .562
- $3.54 3.54 USD
![FOOTPIECE FOR 1"X3" SHANK](/userdocs/products/509-fp1.jpg?width=300&format=webp)
FOOTPIECE FOR 1"X3" SHANK
509-FP1
4" C-C hole spacing, 3/8" steel all welded footpiece. Adjustment slot is open to allow footpiece to trip. Fits Hamby, Roll-A-Cone, CandJ.
- $90.13 90.13 USD
![FOOTPIECE W/PLATE FRONT&REAR](/userdocs/products/509-fp1f.jpg?width=300&format=webp)
FOOTPIECE W/PLATE FRONT&REAR
509-FP1F
Plates have multiple holes Fits 1"x3" shank. 4" C-C hole spacing,
- $124.63 124.63 USD
![1X3 SHANK 4X4 TOOL BAR CLAMP](/userdocs/products/509-l44.jpg?width=300&format=webp)
1X3 SHANK 4X4 TOOL BAR CLAMP
509-L44
Toolbar Clamp, Fits 1" x 3" shank and a 4" x 4" toolbar, 3/8" x 6" body with 1" bolts and plated nuts, 16mm set screws.
- $83.93 83.93 USD
![1X3X30" SHANK W/FP1 FOOT PIECE](/userdocs/products/509-sf130.jpg?width=300&format=webp)
1X3X30" SHANK W/FP1 FOOT PIECE
509-SF130
All of our Toolbar Shanks are manufactured from C1080-high carbon steel. Our shanks are drilled, not heated and punched, to assure that the temper of the steel is not lost in the heating process and even very long sweeps run level.
- $115.34 115.34 USD
![1 X 3 X 34" SHANK W/FT PC](/userdocs/products/509-sf134.jpg?width=300&format=webp)
1 X 3 X 34" SHANK W/FT PC
509-SF134
All of our Toolbar Shanks are manufactured from C1080-high carbon steel. Our shanks are drilled, not heated and punched, to assure that the temper of the steel is not lost in the heating process and even very long sweeps run level.
- $190.83 190.83 USD