For International orders, please email your shipping address and parts list to support@lindstromequipment.com. Any taxes/duty/GST fees are the responsibility of the buyer. 

Filter Sort
close
1 - 7 of 7
 2" POLY PUMP W/6.5hp INTEK-EPDM

2" POLY PUMP W/6.5hp INTEK-EPDM

909-200P6PROEPDM

The new Banjo poly pump is designed to protect the engine seal in the event of pump seal failure. We have separated the pump from the engine by 1 /2" and installed a special slinger/engine seal that completely protects the engine from any corrosive fluids. This new slinger design is the best in the poly pump industry at protecting your engine. Specifications Engine Briggs and Stratton Horsepower 6.5 HP Max Gallons Per Minute 190 GPM Max PSI 50 PSI Pump Body Poly Pump Drive Gas Engine Pump Port Size 2 Inch Pump Seal EPDM Pump Type Transfer Pump UPC 791206042443 Weight 50 lbs. Please note : this item is overweight or oversized, and has additional freight costs.
  • $1,001.91
View Details
BANJO POLY CENTRIFUGAL PUMP, GAS ENGINE 5.5 HP HONDA, 55 PSI MAX PRESSURE, SELF-PRIMING

BANJO POLY CENTRIFUGAL PUMP, GAS ENGINE 5.5 HP HONDA, 55 PSI MAX PRESSURE, SELF-PRIMING

909-200PH5BN

Features Lightweight Self Priming Low Maintenance Corrosion Resistant Precision Molded Construction V-Shaped Body for Quicker Priming Buna Seals Specifications Engine                                   Honda Horsepower                           5.5 HP Material                                 Poly Max Gallons Per Minute       195 GPM Max PSI                                 45 PSI Pressure                                 55 PSI Pump Body                           Poly Pump Drive                          Gas Engine Pump Port Size                     2 Inch Pump Seal                            BUNA Seal Pump Type                           Transfer Pump UPC                                     791206032185 Weight                                 50 lbs.           Please note : this item is overweight or oversized, and has additional freight costs.
  • $1,708.02
View Details
 3" POLY PUMP WITH 6.5 HP HONDA ENGINE

3" POLY PUMP WITH 6.5 HP HONDA ENGINE

909-300PH6

Please note : This item is overweight or oversized, and has additional freight costs Features Features: High strength polypropylene pump body. Corrosion resistant. Lightweight and portable. Constructed with high performance impellers for longer life. Specifications Engine Honda Horsepower 6.5 HP Max Gallons Per Minute 300 GPM Max PSI 30 PSI Pump Body Poly Pump Drive Gas Engine Pump Port Size 3 Inch Pump Seal Ceramic Seal with Stainless Cups Pump Type Transfer Pump UPC 791206034363 Weight 50 lbs.
  • $1,904.82
View Details
 2'' CAST IRON PUMP W/ 6.5 HP BRIGGS

2'' CAST IRON PUMP W/ 6.5 HP BRIGGS

909-200PI6PRO

Banjo 200PI6PRO 2" Cast Iron Self-Priming Pump with 6.5 HP Briggs and Stratton Engine Pro Series. Pump Features: Cast iron construction for rugged dependable service. Stainless steel shaft sleeve to protect engine shaft. Carbon ceramic seal with stainless steel cup and spring with FKM (Viton® type) rubber. Replaceable inlet and outlet flanges. Dynamically balanced impeller. Motor Features: Cast iron cylinder sleeve, Heavy duty flywheel, Overhead valve, High oil fill Oil Guard and low oil sensor, Breather through air cleaner. CAUTION-WARNING: Please do not run pump dry, restrict or reduce port sizes, or dead head pump. This could cause component failure to pump. DO NOT USE WITH FLAMMABLE LIQUIDS. Features: Cast iron construction for rugged dependable service. Stainless steel shaft sleeve to protect engine shaft. Carbon ceramic seal with stainless steel cup and spring with FKM (Viton® type) rubber. Replaceable inlet and outlet flanges. Dynamically balanced impeller. Specifications Engine Briggs and Stratton Horsepower 6.5 HP Material Cast Iron Max Gallons Per Minute 190 GPM Max PSI 45 PSI Pressure 40 PSI Pump Body Cast Iron Pump Drive Gas Engine Pump Port Size 2 Inch Pump Seal Ceramic Seal with Stainless Cups Pump Type Transfer Pump UPC 791206043297 Weight 60 lbs. Please note : this item is overweight or oversized, and has additional freight costs.
  • $1,593.51
View Details
BANJO 2-INCH CAST IRON PUMP WITH 5.5 HP HONDA® ENGINE

BANJO 2-INCH CAST IRON PUMP WITH 5.5 HP HONDA® ENGINE

909-222PIH5

New Design 2" Gas Driven Cast Iron Self-Priming Pump with 5.5 Horsepower Honda Engine FKM (VITON TYPE) SEALS. Features: Cast iron construction for rugged dependable service. Carbon ceramic seal with stainless steel cup and spring with FKM (Viton® type) rubber. Replaceable inlet and outlet flanges. Dynamically balanced impeller. Pump end separated from engine. Heavy duty slinger seal on motor shaft. Large weep holes between pump end and engine. "V " Shaped for quicker priming. 6.5 BRIGGS and STRATTON INTEKMOTOR (right) Cast iron cylinder sleeve. Heavy duty flywheel. Overhead valve. High oil fill OilGuard® low oil sensor. Breather through air cleaner. HONDA ENGINE (below) GX Series commercial grade. Legendary reliability/durability. Powerful Overhead Valve (OHV). 2-year commercial and homeowner warranty. Industrial 2-stage air filter. Quiet, easy starting. Oil alert. CAUTION-WARNING: Please do not run pump dry, restrict or reduce port sizes, or dead head pump. This could cause component failure to pump. DO NOT USE WITH FLAMMABLE LIQUIDS. Specifications Engine Honda Horsepower 5.5 HP Max Gallons Per Minute 205 GPM Max PSI 45 PSI Pump Body Cast Iron Pump Drive Gas Engine Pump Port Size 2 Inch Pump Seal Ceramic Seal with Stainless Cups Pump Type Transfer Pump UPC 791206033380 Weight 103 lbs. Please note : this item is overweight or oversized, and has additional freight costs.
  • $2,227.58
View Details
AgriTuf SuperRip AgressivePoint 7" for 1-1/2" Shank Fits Case / DMI Ripper Replaces 48058575

AgriTuf SuperRip AgressivePoint 7" for 1-1/2" Shank Fits Case / DMI Ripper Replaces 48058575

ATSRC7A-112

AgriTuf SuperRip AgressivePoint 7" for 1-1/2" Shank Fits Case / DMI Ripper Replaces 48058575 Specifications Application Ripper / Subsoiler For Shank Size 1-1/2 Inch Material Hi-Strength Chrome Alloy UPC 847810086370 Weight 29.7 lbs. Width 7 Inch Application Make Type Model Case IH Ripper 530, 690, 730, 9300 Interchanges 48058575 (CNH) ATSRC1127A ATSRC7A12
  • $244.20
View Details
BANJO 3 INCH CAST IRON PUMP WITH 13 HP HONDA ENGINE, ELECTRIC START

BANJO 3 INCH CAST IRON PUMP WITH 13 HP HONDA ENGINE, ELECTRIC START

909-300PIH13

Features: Cast iron construction for rugged dependable service. Stainless steel shaft sleeve to protect engine shaft. Carbon ceramic seal with stainless steel cup and spring with FKM (Viton® type) rubber. Replaceable inlet and outlet flanges. Dynamically balanced impeller. CAUTION-WARNING: Please do not run pumps dry, restrict or reduce port sizes or dead head pumps. This could cause component failure to pump. DO NOT USE WITH FLAMMABLE LIQUIDS. Specifications Engine Honda Horsepower 13 HP Max Gallons Per Minute 300 GPM Max PSI 60 PSI Pump Body Cast Iron Pump Drive Gas Engine Pump Port Size 3 Inch Pump Seal Ceramic Seal with Stainless Cups Pump Type Transfer Pump UPC 791206034516 Weight 210 lbs. Please note : this item is overweight or oversized, and has additional freight costs.
  • $5,754.20
View Details
1 - 7 of 7
1